Product Code : 6740070102
Sikafloor® -ProSeal -22 is a one-part, solvent based, clear acrylic resin, polymer solution used to cure, harden and seal fresh or hardened concrete. It is used for optimum curing and sealing of fresh concrete floors and structures. Sikafloor® -ProSeal 22 provides excellent moisture retention on substrates and helps control dusting altogether. It effectively cure and seal concrete surfaces in a single, economic operation. In addition, it provides good abrasion resistance and adhesion to old and new concrete. It provides curing and sealing for Sikafloor® dry shake hardeners Anti-dust treatment and improvement of the abrasion resistance of existing concrete surfaces. Furthermore, it is suitable for both exterior and interior applications.
Sikafloor® -ProSeal -22 is packaged in 20 liters metal pails and 200 liters drums, with a shelf life of 12 months from the date of production. It is advised to store in original, unopened, and undamaged sealed containers, in dry conditions at temperatures between +5 °C and +25 °C.Sikafloor® -ProSeal -22 is a one-part, solvent based, clear acrylic resin, polymer solution used to cure, harden and seal fresh or hardened concrete. It is used for optimum curing and sealing of fresh concrete floors and structures. Sikafloor® -ProSeal 22 provides excellent moisture retention on substrates and helps control dusting altogether. It effectively cure and seal concrete surfaces in a single, economic operation. In addition, it provides good abrasion resistance and adhesion to old and new concrete. It provides curing and sealing for Sikafloor® dry shake hardeners Anti-dust treatment and improvement of the abrasion resistance of existing concrete surfaces. Furthermore, it is suitable for both exterior and interior applications.
Sikafloor® -ProSeal -22 is packaged in 20 liters metal pails and 200 liters drums, with a shelf life of 12 months from the date of production. It is advised to store in original, unopened, and undamaged sealed containers, in dry conditions at temperatures between +5 °C and +25 °C.
Prior to application, all dust, loose and friable material must be completely removed from all surfaces before application of the product, preferably by brush and/or vacuum. Fresh concrete surfaces must be free of bleed water and of sufficient strength to withstand finishing operations. The fresh concrete must be prepared by suitable power or manual floating/tamping techniques. Hardened or old concrete surfaces must be sound, open textured, clean, free from frost, laitance, surface water, oils, grease, coatings, all loosely adhering particles and other surface contaminants. The substrate must be prepared by suitable mechanical preparation techniques such as high-pressure water or abrasive blasting cleaning equipment.
For fresh concrete application, apply immediately after finishing techniques have been completed. It is advised to apply in a continuous evenly film by low-pressure spray unit. achieving the highest visual aesthetics and performance, a second coat is recommended. It is advised to wait for the first coat to dry and tack free before applying the second coat.
In hot weather ,above +25 °C, store Sikafloor® -ProSeal-22 in a cool place prior to use. In low temperatures ,below +10 °C, the product may thicken and reduce sprayability. Do not use sprayers, which have been used to spray silicone or release agents. Do not mix different formulations of Sika® or other curing membranes. Ensure spraying equipment is cleaned thoroughly before use and residues of previous membranes are removed. Sikafloor® -ProSeal-22 must be mechanically removed prior to the application of a coating system.
For safety precautions, it is advised to use proper protective equipment when handling and using the product. It should not be disposed into the drainage system or nearby water sources and soil, properly dispose of this product according to local laws and regulations.Prior to application, all dust, loose and friable material must be completely removed from all surfaces before application of the product, preferably by brush and/or vacuum. Fresh concrete surfaces must be free of bleed water and of sufficient strength to withstand finishing operations. The fresh concrete must be prepared by suitable power or manual floating/tamping techniques. Hardened or old concrete surfaces must be sound, open textured, clean, free from frost, laitance, surface water, oils, grease, coatings, all loosely adhering particles and other surface contaminants. The substrate must be prepared by suitable mechanical preparation techniques such as high-pressure water or abrasive blasting cleaning equipment.
For fresh concrete application, apply immediately after finishing techniques have been completed. It is advised to apply in a continuous evenly film by low-pressure spray unit. achieving the highest visual aesthetics and performance, a second coat is recommended. It is advised to wait for the first coat to dry and tack free before applying the second coat.
In hot weather ,above +25 °C, store Sikafloor® -ProSeal-22 in a cool place prior to use. In low temperatures ,below +10 °C, the product may thicken and reduce sprayability. Do not use sprayers, which have been used to spray silicone or release agents. Do not mix different formulations of Sika® or other curing membranes. Ensure spraying equipment is cleaned thoroughly before use and residues of previous membranes are removed. Sikafloor® -ProSeal-22 must be mechanically removed prior to the application of a coating system.
For safety precautions, it is advised to use proper protective equipment when handling and using the product. It should not be disposed into the drainage system or nearby water sources and soil, properly dispose of this product according to local laws and regulations.
