PBL Construction & Trade
  • Sikafloor 264HC

    Code: 0055

    2-part epoxy self-smoothing and broadcast system Use: • Self-smoothing and broadcast systems for concrete and cement screeds with normal up to medium heavy wear e.g. storage and assembly halls, maintenance workshops, garages, loading ramps, etc. • The broadcast system is recommended for wet process areas, e.g. in beverage industry, food industry, maintenance hangars etc. Advantages: • Highly fillable. • Good chemical and mechanical resistance. • Easy application, economical, liquid proof. • Solvent-free, gloss finish, slip resistant. • Average finish thickness # 2 mm.
  • Sika Multiseal

    Code: 0054

    Tearproof and self-adhesive bituminous sealing tape Use: Sealing and repairing against water ingress and graughts in: • Roofs including sheet metal work/ building cracks/ bituminous felts and other types of roofing sheet Advantages: • Very economical. • Good adhesion to many substrates. • Weather-proof. • Self-adhesive. • UV-resistant. • Bitumen-resistant. • Can be over-painted. • Can be applied at low temperatures.
  • Sikafloor 161HC

    Code: 0053

    2-part epoxy primer, levelling mortar Use: • For priming concrete substrates, cement screeds and epoxy mortars. • Primer for the Sikafloor® 263 SL and Sikafloor® 264 economic flooring systems. • Binder for levelling mortars and mortar screeds. Advantages: • Low viscosity. • Good penetration. • Excellent bond strength even on water saturated concrete. • Easy application, short waiting time, and multi-purpose.
  • SikaRep S

    Code: 0052

    Thin patching repair mortar for very smooth finishing Use: SikaRep S is suitable for the following works such as • Concrete repair especially for vertical applications. • Filling/ repair mortar for voids. • Repair of spelled concrete caused by reinforcement corrosion. Advantages: • Give very smooth surface finishing. • Excellent workability. • Adjustable consistency. • Excellent thixotropic behavior. • Good mechanical strengths. • Applicable in layers up to 20mm thickness (vertical surface). • Non-toxic and non-corrosive.
  • Sikafloor Curehard 24

    Code: 0051

    Transparent surface hardener, dustproofer, sealing and curing compound Use: Horizontal old or new concrete surfaces, where a hard surface with light to moderate abrasion resistance is required such as: warehouses, industiral plants, stores, etc. On concrete slabs where no specific curing efficiency or standards are required. Advantages: • Ready to use and easy to apply. • Improved chemical and abrasion resistance compared to untreated concrete. • Reduced dusting on concrete floors. • Reduced loss of water of new concrete while setting. • Improves cleanability. • Non-yellowing. • Good penetration. • Solvent-free.
  • Sikafloor 263 SL HC

    Code: 0050

    2-part epoxy self-smoothing and broadcast system Use: • Self-smoothing and broadcast systems for concrete and cement screeds with normal up to medium heavy wear e.g. storage and assembly halls, maintenance workshops, garages, loading ramps, etc. • The broadcast system is recommended for wet process areas, e.g. in beverage industry, food industry, maintenance hangars etc. Advantages: • Highly fillable. • Good chemical and mechanical resistance. • Easy application, economical, liquid proof. • Solvent-free, gloss finish, slip resistant. • Average finish thickness # 2 mm.
  • Sikafloor 21 Purcem TH

    Code: 0049

    Self-leveling polyurethane-cement floor topping Use: Sikafloor® 21Purcem® TH is ideally suited for the following areas: • Chemical processing, food processing and wet areas, brewing and dairy (clean areas). • Engineering process areas. • Heavy duty traffic and plant areas. • Warehouse/ logistic areas. Advantages: • Resistance to organic and inorganic acids, alkalis, fuel and hydraulicoils. • Durable and resistant to abrasion and impact.
  • Sikafloor ProSeal 22

    Code: 0048

    Clear acrylic polymer solution for curing and sealing compound Use: Sikafloor® ProSeal -22 is used for optimum curing and sealing of fresh concrete floors and structures. • Curing compound in order to limit surface drying and cracking. • Provides curing and sealing for Sikafloor® dry shake hardeners. • Anti-dust treatment and improvement of the abrasion resistance of existing concrete surfaces.
  • Sika Primer 3N

    Code: 0047

    Primer for Sikaflex joint sealant Use: Primer on porous subtrates for Sikaflex® Pro 2HP, Sikaflex® Construction, Sikaflex® 11FC, Sikaflex® PRO 3WF joint sealants. Advantages: • Easy to apply by brush. • Good wetting properties. • Can be applied to mat-moist subtrates.
  • Sika Poxitar F

    Code: 0046

    Heavy duty epoxy-anthracene oil coating for steel and concrete Use: • Protective coat for concrete and steel, as internal and external coating for buried and submerged structures, e.g. sewage systems, chemical industry, etc. • Also suitable where application onto damp concrete is inevitable. Not suitable for surfaces in contact with drinking water, housing, etc. Advantages: • Tough hard, heavy duty. • Abrasion and impact resistant. • Excellent resistance to water and chemicals.
  • Sika Leveling Mortar

    Code: 0045

    Leveling compound on concrete for demestic or commercial area Use: Sika® Leveling Mortar® is suitable as underlayment in thickness from 5-9mm for: • Vinyl tiles, carpet, timber sport floors. • Parquet floors, prefabricated flooring systems, roof membrane. Advantages: • Pre-bagged at the factory with consistent quality. • Self-smoothing and highly fluid. • Placeable manually or by pump, 18 hours walk on time. • Non-toxic and non corrosive. • Chloride and iron-free. • Impact and vibration resistant.
  • Sika Glass Mesh

    Code: 0044

    Glass fabric for acrylic elastic waterproof A woven glass membrane is used to enhance Sika® Raintile, Igolflex-R, Acrylic Elastic, waterproof membrane crack bridge performance. Use: It is used for roofs and when Igolflex® R is overlapping construction joints, cracks and corner fillets.
  • Rotary Hammer

    Code: HDM1043P

    Charger voltage 220-240V~, 50Hz Power input 1,100W No load speed 300-760/min Impact rate 1.950-4.860/min Chuck size SDS-max Impact energy 1-7 Joule Machine weight 6.6 Kg
  • Demolition Hammer

    Code: HDM1042P

    Mains voltage 220-240V~, 50Hz Power input 1,600W Impact rate 1.450/ min Chuck size Hex 30mm Impact energy 30 J Machine weight 16 Kg Function 1 (Chiseling)
  • Demolition Hammer

    Code: HDM1041P

    Mains voltage 220-240V~, 50Hz Power input 1,500W Impact rate 1.000-1.900/ min Chuck size SDS-max Impact energy 6-25 J Machine weight 11 Kg Function 1 (Chiseling)
  • Rotary Hammer

    Code: HDM1038P

    Charger voltage 220-240V~, 50Hz Power input 800W No load speed 0-1.250/min Impact rate 0-5.500/min Chuck size SDS-plus Impact energy 2.7 Joule Machine weight 3.3 Kg
  • Electric Blower

    Code: EBM1004P

    Mains voltage 220-240V~, 50Hz Power input 600W No load speed 0-13.900/ min Air Volume 0-4.1m³/min Machine weight 2.3 Kg
  • Hot Air Gun

    Code: HAM1017P

    Mains voltage 220-240V~, 50Hz Power input 2,000W Temperature Volume 50-600°C Machine weight 0.9 Kg
  • Precision Router

    Code: PRM1019P

    Mains voltage 220-240V~, 50Hz Power input 2,200W No load speed 9.000-22.000/min Collect size Ø12mm Machine weight 5.8 Kg
  • Trimmer

    Code: PRM1020P

    Mains voltage 220-240V~, 50Hz Power input 550W No load speed 35.000/min Collect size Ø6mm Machine weight 1.6 Kg
  • Planer

    Code: PPM1015P

    Mains voltage 220-240V~, 50Hz Power input 620W No load speed 0-17.000/min Planing width 82mm Planing depth 0-2mm Machine weight 2.8 Kg
  • Belt Sander

    Code: BSM1025P

    Mains voltage 230V~, 50Hz Power input 1,400W Belt speed 500m/ min Belt size 100x610mm Machine weight 6.2 Kg
  • Orbital Sander

    Code: PSM1030P

    Mains voltage 220-240V~, 50Hz Power input 520W No load speed 10.000/ min Sanding surface 114x234mm Paper size 114x278mm Machine weight 2.7 Kg
  • Orbital Sander

    Code: PSM1029P

    Mains voltage 220-240V~, 50Hz Power input 300W No load speed 13.000/ min Sanding surface 93x185mm Paper size 93x230mm Machine weight 2.0 Kg
Scroll